Reduce EU ETS costs with real emissions data
Everflow is a Continuous Emissions Monitoring System for shipping operators, using direct exhaust direct measurement to replace fuel-based estimates with certified, verifiable data.
Built for real onboard conditions and continuous emissions monitoring at sea.
Direct onboard exhaust measurement
Supports EU ETS, FuelEU Maritime, and IMO reporting
From pilot vessels to fleet-wide deployment
Trusted by leading maritime operators
THE PROBLEM
You are overpaying EU ETS by 10-20% due to over estimated emissions
Standard estimation methods inflate reported emissions, increasing compliance costs, and reducing confidence in reported data.
01
ROOT CAUSE
Emissions are estimated using standard factors, not measured in operation
Standard factors and conservative assumptions can overstate actual emissions.
02
FINANCIAL IMPACT
This leads to higher EU ETS costs
When reported emissions exceed actual values, operators surrender more allowances than necessary.
03
CONTROL & RISK
And you have no way to challenge it
Without reliable onboard data, reported emissions cannot be independently verified.
ABOUT EVERFLOW
What is Everflow?
Everflow is an onboard emissions measurement system for ships - combining exhaust gas sensors, analysis and control units, and a cloud platform to deliver real emissions data directly from vessel operations.
WHY EVERFLOW
A direct, certified approach to maritime emissions measurement
Direct exhaust measurement
Measure emissions at the source using onboard systems rather than relying on fuel-based estimation models.
Compliance-ready by design
Aligned with EU ETS, FuelEU Maritime, and IMO reporting requirements — with certified, verifiable emissions data.
Scales from vessel to fleet
Start with one vessel, validate performance, and expand to fleet-wide deployment.
SAVE
UP TO €1M / Year
FOR EACH EQUIPPED VESSEL
Potential savings enabled by more accurate, exhaust-based emissions measurement for compliance and reporting.
Unlock millions in annual savings
Across your fleet
HOW IT WORKS
How Everflow works onboard your vessel
Everflow combines direct exhaust measurement, onboard gas analysis, and cloud-based reporting to generate credible emissions data for maritime compliance.
01
Measure at the source
A hot-wet extraction setup captures emissions directly from vessel exhaust, preserving measurement accuracy without condensation loss.
02
Analyze onboard
The gas analyser, flow meter, probe, and control unit continuously process emissions data onboard.
03
Transmit and report
Validated data is sent to the platform for monitoring and compliance reporting.
Built on direct exhaust measurement, gas analysis, and onboard processing — designed for real maritime operating conditions.
WHAT IT ENABLES
From measurement to measurable impact
Accurate onboard emissions data drives reporting automation, regulatory readiness, and clearer operational performance.
Automated reporting
Generate EU ETS and compliance reports with minimal manual effort.
Future-ready compliance
Adapt to evolving regulations including EU ETS, FuelEU Maritime, and IMO.
Better emissions visibility
Understand actual emissions performance instead of relying on estimates.
PLATFORM
One platform for emissions monitoring and compliance
Monitor emissions, manage reports, and track compliance — all from one interface.
